61 31 172 Removing and installing/replacing switch for electromechanical parking brake (M6 with twin-clutch gearbox)

Necessary preliminary tasks:

Release screws (1).

Remove switch for electromechanical parking brake (2) from center console switch center (3).

Fig 1: Identifying Center Console Switch And Electromechanical Parking Brake

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1).

Release side catches (2).

Remove cover (3) from switch for electromechanical parking brake (4).

Fig 2: Identifying Side Catches, Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining elements (1) on cover (2) must not be damaged or missing.

Fig 3: Identifying Retaining Elements On Cover

Courtesy of BMW OF NORTH AMERICA, INC.