Remove the cover panel of the master DME control unit

NOTE: RISK OF DAMAGE 
Damage to the acoustic cover/design cover. 
Jerky movements during disassembly and application of excessive force during installation may result in breakage of the acoustic cover/design cover. 

• Disassemble or mount the acoustic cover/design cover carefully.
• Disassemble or mount snap-lock couplings of the ball pivots one after the other.
• Disassemble or mount the acoustic cover/design cover only at temperatures > 20°C.
• Use only distilled water as an auxiliary material during installation, no lubricants.

• Disengage the cover panel of the master DME control unit (1)  upward from the clamps (2)  and the guide pins (3)  .
• Remove the cover panel of the master DME control unit (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.