Install rear underbody protection
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Version A:
Insert the rear underbody protection (1).
Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONSUndershield screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm - Version
B:
Feed in rear underbody protection (1) and install.
Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONSUndershield screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm - Version C:
Feed in rear underbody protection (1) and install.
Tighten screws (arrows),
TIGHTENING TORQUE SPECIFICATIONSUndershield screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm