33 32 Trailing Arms And Struts

TIGHTENING TORQUE SPECIFICATION (AXLE GUIDE AND AXLE STRUT)

	Type	Thread	Tightening specifications	Dimension
1AZ Lower front wishbone to rear axle support	F80/F82/F83/F87	M12	Replace screw.	100 Nm
2AZ Front lower wishbone to wheel carrier	F80/F82/F83/F87	M12	Replace screw.	100 Nm
3AZ Rear lower wishbone (track control arm) to rear axle support	F80/F82/F83/F87	M12	Replace screw.	100 Nm
4AZ Rear lower wishbone (track control arm) to wheel carrier	F80/F82/F83/F87	M12	Replace nut.	100 Nm
5AZ Front and rear upper wishbones to rear axle support	F80/F82/F83/F87	M12	Replace screw and nut. Tighten down in NORMAL POSITION .	100 Nm
6AZ Front and rear upper wishbones to wheel carrier	F80/F82/F83/F87	M14	Replace nut.	165 Nm
7AZ Camber control arm to rear axle support	F80/F82/F83/F87	M14	Replace screw and nut. Tighten down in NORMAL POSITION .	165 Nm
8AZ Camber control arm to wheel carrier	F80/F82/F83/F87	M14	Replace nut.	165 Nm
9AZ Reinforcement strut to body, outside	F80/F82/F83/F87	M10	Replace screws.
			Jointing torque	56 Nm
			Angle of rotation	60°
10AZ Reinforcement strut/double strut to side sill	F80/F82/F83/F87	M12	Replace screw.
			Jointing torque	100 Nm
			Angle of rotation	90°
11AZ Reinforcement strut to body, middle	F80/F82/F83/F87	M8		24 Nm
12AZ Reinforcement strut to rear axle support	F80/F82/F83/F87	M10	Replace nut.	79 Nm
13AZ Double strut to reinforcement strut	F87	M8		24 Nm
14AZ Reinforcement strut to reinforcement strut	F83	M8	Replace screws.	24 Nm
15AZ Bracing strut to body	F83	M12	Replace screw.
			Jointing torque	100 Nm
			Angle of rotation	90°