Removing and installing/replacing brake shoe expander for parking brake shoe
Special tools required:
- 32 1 030
Necessary preliminary work
- Remove PARKING BRAKE SHOES .
Lock adjustment unit (ASZE).
Actuate parking brake lever. Connect special tool 32 1 030. Press limit position (1) of adjusting spring back to such an extent that retaining hook (2) engages in limit position (1).
Installation note:
Unlock adjustment unit (ASZE).
Lever out restraining hook (2) with a suitable screwdriver.
Restraining hook (2) must detach from limit position (1) of adjusting spring.
Pull brake shoe expander (1) forward, disconnect parking brake Bowden cable (2) and remove brake shoe expander.
After installation:
- Adjust PARKING BRAKE .