23 21 Transmission Shafts
TIGHTENING TORQUE SPECIFICATION (TRANSMISSION SHAFTS)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Output flange | S5D 200G/S5D 250G/S5D260Z/S5D 310Z/S6S 420G | Collar nut installed with screw lock Step 1. Pretension Step 2. Slacken Step 3. Tighten down |
190 Nm - 120 Nm |
|
| S5D 280Z/S5D 320Z | Collar nut installed with screw lock Step 1. Pretension Step 2. Slacken Step 3. Tighten down |
170 Nm - 130 Nm |
||
| S5D 390Z | Collar nut installed with screw lock Step 1. Pretension Step 2. Slacken Step 3. Tighten down |
200 Nm - 145 Nm |
||
| GS6-17BG/GS6-17DG/GS6-17FG/GS6-17JG/GS6-37BZ | Collar nut installed with screw lock Step 1. Pretension Step 2. Slacken Step 3. Tighten down |
170 Nm - 120 Nm |
||
| GS6-45BZ | Collar nut installed with screw lock Step 1. Pretension Step 2. Slacken Step 3. Tighten down |
200 Nm - 150 Nm |
||
| GS6-53DZ/BZ | Collar nut installed with screw lock Step 1. Pretension Step 2. Slacken Step 3. Tighten down |
200 Nm - 140 Nm |
||
| GS7S47BG | Collar nut installed with screw lock | 200 Nm | ||
| 2AZ Gear to countershaft | 265/Sport | M10 | 60 Nm | |
| 3AZ Adapter shaft to the output | GS6X45BZ | 68 Nm |