Replacing gearshift lever knob

Removal:

Pull installation frame of gaiter at the sides upwards out of center console.

IMPORTANT: Do not use a tool, as this would damage the installation frame or the center console.

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect the connector (1).

Tug firmly to remove button.

NOTE: Do not twist knob during removal as this would cause the anti-twist lock in the knob to shear off.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect button to gearshift lever, align and press on until it noticeably engages.

Connect connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Press installation frame of gaiter downwards into center console at sides.

IMPORTANT: Do not use a tool, as this would damage the installation frame or the center console.

Courtesy of BMW OF NORTH AMERICA, INC.