21 21 Clutch With Drive Plate
TIGHTENING TORQUE SPECIFICATION (CLUTCH DISC AND DRIVE PLATE)
| Type | Thread | Work instruction | Dimension | |
|---|---|---|---|---|
| Clutch to flywheel | F06/F10/F11/F12/F13/F18/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33/F34/F36/F80/F82/F83/F87 | M8 10.9 | Replace screws. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
15 Nm 90° |