Removing and installing/replacing rear left or right lower straps (Except M4 Convertible)
Necessary preliminary tasks:
- Remove REAR SEAT .
Removal of left lower strap:
Release screw (1).
Installation note:
Replace screw (1).
Tightening torque 72 11 23AZ .
Unfasten PLUG CONNECTION (2) and disconnect.
Remove lower strap (3).
Installation note:
Lower strap is coded against incorrect assembly.
Removal of right lower strap:
Release screw (1).
Installation note:
Replace screw (1).
Tightening torque 72 11 23AZ .
Unlock PLUG CONNECTIONS (2) and disconnect.
Remove lower strap (3).
Installation note:
Lower strap is encoded against incorrect assembly (3).
Lower strap with belt tensioner:
Removal is depicted for the left lower strap; the right strap is removed in the same manner.
Unfasten PLUG CONNECTION (2) and disconnect.
Release screw (1).
Installation note:
Replace screw (1).
Tightening torque 72 11 23AZ .
Remove lower strap (3).
Installation note:
Encoding (4) determines the mounting orientation and prevents the lower strap (3) from twisting.