Charging battery

WARNING: Observe SAFETY INSTRUCTIONS for handling vehicle battery.

IMPORTANT: Lead-acid battery. AGM battery :
To prevent the intelligent battery sensor from malfunctioning. Use the charging points in the engine compartment.

Observe instructions on INTELLIGENT BATTERY SENSOR/BATTERY ELECTRONICS .

NOTE: Use BMW-recommended charging computers* to charge the battery.

Pay attention when charging the lithium ion battery!

Existing chargers that are designed for the lead-acid or AGM battery generate a charging voltage that is too high for the lithium-ion battery.

If the charging voltage is too high, the electronic disconnect switch of the Li-ion battery can open, which generates a CCM message in the instrument cluster.

Before charging a lithium ion battery, adjust the CHARGING VOLTAGE OF EXISTING CHARGER ADAPTERS ONCE .

Follow notes on LITHIUM ION BATTERY .