Removing and installing/replacing speaker (tweeter, in dashboard)

Special tools required:

Unclip trim (1) with special tool 00 9 327 from latch mechanisms and remove upwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs and clamps at marked points must not be damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 65 13 6AZ .

Pull out mid-range speaker (2) upwards from dashboard (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (2) at mid-range speaker (3).

Release screws (5) on tweeter (4).

Pull out tweeter (4) upwards from dashboard (1).

Courtesy of BMW OF NORTH AMERICA, INC.