Initializing Telestart hand-held transmitter
NOTE:
The Telestart hand-held transmitter must be initialized when:
- Hand-held transmitter is replaced
- Car Access System control unit is replaced
The auxiliary heater is switched on with the hand-held transmitter and at a pre-selected switch-on time under an ambient temperature of approx. 15°C.
Heating can be activated directly in the Central Information Display at any ambient temperature. To do so, go to the park function menu under direct operation and mark the auxiliary heating box.
NOTE:
Initialization can only be carried out with the BMW diagnostic system.
Follow instructions and specifications in procedure .
Service functions:
- Complete vehicle
- Body
- Air conditioning function
- Telestart transmitter
- Initialization