Replacing actuator drive for right stratification flap

Necessary preliminary tasks: 

• Remove GLOVE BOX .

Release screws (1).

Take off holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip air duct (1) downward at retaining clasp (2).

Pull off air duct (1) in direction of arrow.

Installation note: 

Air duct (3) must be correctly engaged in duct (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Unfasten plug connection (2) and disconnect.

Remove actuator drive (4).

Installation note: 

Make sure actuator drive (4) is correctly seated in the guide (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Servomotors must be readdressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

• Body
• Heating and air conditioning function
• Flap motors
• Readdress flap motors