Replace control panel for heater/air conditioning system

IMPORTANT: Read and comply with notes on protection AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

IMPORTANT: Retrofitting must only be done in the supplied installation cassettes.

Use of supplied gloves is mandatory.

Carry out installation in a dust-free workshop area only.

To avoid damage, do not touch or dirty the display field.

Necessary preliminary tasks:

Disconnect plug connection (2).

Unclip AC control panel (1) at marked points with a suitable tool (e.g. screwdriver - 3 mm blade).

Remove AC control panel (1) from cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.