Pre-delivery check (Except M4 GTS)
Quality assurance by BMW Service
Model:
Vehicle identification number:
(Please tick where appropriate)
If necessary Quick Reference Guide:
Included with the vehicle:
The vehicle document case is left in vehicle the vehicle:
Discussed and handed over
Owner's Handbook(s)
Maintenance record booklet (with national-market version Korea only)
Vehicle key/remote key
If necessary - spare key
Glove box
Storage box
Luggage compartment
I hereby confirm that I have received the vehicle in perfect condition.
Place and date
Signature of vehicle owner
Pre-delivery check by BMW Service
Scopes of inspection:
To be kept with the workshop documents
The following work must be carried out on the vehicle by BMW Service prior to delivery.
Model:
Vehicle identification number:
| Scopes of inspection: to be kept with the vehicle documents | |||||
| Accessory items | OK. | Not OK | not present | ||
| For F01, F02 and F03 only: ECE: Place cup holder insert in glove box US: Insert cup holder insert into cup holder receptacle |
|||||
| For M6 only (F06 and F13): Install front spoiler | |||||
| install other enclosed parts scope (only in Market China: Take high-visibility jacket out of the luggage compartment and stow it in the storage compartment of the driver's door) | |||||
| If part of the accessories kit package: Installing on board device for electronic toll collection (dual chip toll function OBU) (in case of equipment specification with SA4VE Electronic toll system) (only in Chinese market) | |||||
| Using BMW Group diagnosis system | OK. | Not OK | not present | ||
| Carry out "CBS pre-delivery check" in the Service Function path under Maintenance | |||||
| Deactivate transportation mode | |||||
| Perform the following additional work only with SA5GB: Activating stolen vehicle tracking(1). | |||||
| Reset average mileage/kilometers driven | |||||
| Enter first registration | |||||
| Set on-board date | |||||
| Set statutory inspection dates(1). | |||||
| Enter service telephone numbers | |||||
| BMW TeleServices(1): Activate | |||||
| Navigation system(1): Activate the roadmap. Check the up-to-dateness of the roadmap and update if necessary. | |||||
| Check battery, observe notes in the diagnosis system, if applicable, charge battery | |||||
| Delete fault memory | |||||
| Carry out vehicle test, eliminate faults if necessary | |||||
| Engine compartment | OK. | Not OK | not present | ||
| Check for cleanliness | |||||
|
NOTE:
It is possible that the cooling system has been filled above the maximum mark ex works. Do not adjust the coolant level. The normal coolant level is reached while driving the vehicle.
|
|||||
| Fluid tank for washer fluid | OK. | Not OK | not present | ||
| Check fluid level and top up if necessary, where required with antifreeze additive | |||||
| Labels | OK. | Not OK | not present | ||
| Apply label for BMW Group Mobile Service | |||||
| Body, interior equipment, vehicle underbody | OK. | Not OK | not present | ||
| Check for transportation damage | |||||
| For F10, F11 and F18 with automatic transmission: Check that the cupholder cover is functioning correctly and engage the cupholder insert correctly if necessary |
|||||
| Spring blocker (1) | OK. | Not OK | not present | ||
| Remove | |||||
| Tires | OK. | Not OK | not present | ||
| Checking tire pressure Observe the information on tolerance compensation for RDC. |
|||||
| Initialize Run Flat Indicator (RPA) or tire pressure control (RDC) | |||||
| For winter tires(1) attach the label V-max. | |||||
| Maintenance record booklet (1) (with national-market version Korea only) | OK. | Not OK | not present | ||
| Stamp pre-delivery check/enter vehicle identification number | |||||
| Attach documentation (glove box/storage box/luggage compartment) | OK. | Not OK | not present | ||
| Rider's Manual | |||||
| Maintenance record booklet (with national-market version Korea only) | |||||
| Contact booklet | |||||
| BMW Group Mobile Service brochure | |||||
| Include key/remote control (make note of number) | |||||
| Indicator/warning lights and Check Control | OK. | Not OK | not present | ||
| Check and remove fault if applicable | |||||
| Service and parking brake | OK. | Not OK | not present | ||
| Transport and immobilization periods of 3-6 weeks: Check for correct operation | |||||
| In event of transportation and immobilization periods of more than 6 weeks: Brake in | |||||
| Interior mirror with digital compass (1) | OK. | Not OK | not present | ||
| Calibrate system | |||||
| Transportation lock (1) and vehicle cleaning | OK. | Not OK | not present | ||
| Remove the TRANSPORTATION PROTECTIVE FILM . | |||||
| Clean inside and outside of vehicle | |||||
| Notes: | |||||
|
|||||
Date
Mechanic
Workshop Supervisor