11 11 Engine Block
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATIONS
| Bore ø stage 0 | mm | 84.000+0.014 | ||
| Bore ø stage 00 (1). | mm | % | ||
| Bore ø stage 1 (1). | mm | Not yet released | ||
| Permitted out-of-round of cylinder bore (1). | mm | 0.01 | ||
| Permitted conicity of cylinder bore (1). | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||