LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Fuel Supply System - Repair) >> Fuel transfer, Sensor >> 16 12 010 Removing and installing/replacing carbon canister with DM-TL (M54)

16 12 010 Removing and installing/replacing carbon canister with DM-TL (M54)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2004 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

DM-TL = diagnosis module-tank leakage 

Release screws (1), lift out expansion rivet (2) and remove cover (3).

Lever out expansion rivets (4) and remove cover (5).

Fig 1: Lifting Out Expansion Rivet
G03123809Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten lines (1)... (3) and detach.

  1. Line to expansion tank
  2. Scavenging air line
  3. Intake line for dust filter
Fig 2: Unfastening Lines And Detach
G03123810Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1).

Release screws (2) and remove carbon canister (3) with DM-TL (4) towards bottom.

Fig 3: Unfastening Plug Connection
G03123811Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Press rubber-encased lugs (1) on carbon canister (2) into guides (3).

Fig 4: Pressing Rubber-Encased Lugs On Carbon Canister Into Guides
G03123812Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals