00 2 480 Measurement stand with clamp
WARNING: This page is about a different car, the 2005 BMW 760i, 2005 BMW 760Li, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
MEASUREMENT STAND WITH CLAMP SPECIFICATIONS
| Engine: | M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57TU, M60, M62, M62VAN, M67, M70, M73, M88, N40, N42, N62, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17 |
| SI number: | 1 18 99(489) |
| Order number: | 00 2 480 |
| Measurement stand with clamp | |
| Consisting of: | |
| 1 = 00 2 481 | Clamping foot |
| 2 = 00 2 482 | Clamping piece |
| 3 = 00 2 483 | Shaft |
| 4 = 00 2 484 | Shaft |