00 2 300 Assembly stand with universal flange

WARNING: This page is about a different car, the 2005 BMW 760i, 2005 BMW 760Li, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Note: For accommodating engines from S85

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N52, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17

SI number: 01 25 04 (155)

Order number: 00 2 300

Assembly stand with universal flange

Fig 1: Identifying Assembly Stand With Universal Flange

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 00 2 301 Assembly stand

2 = 00 2 302 Universal flange

3 = 00 2 303 Crank

4 = 00 2 304 Protection hood

5 = 00 2 305 Storage for small parts

6 = 00 2 306 Moulded tray, rear

7 = 00 2 307 Oil drip tray

8 = 00 2 308 Moulded tray, front

9 = 00 2 309 Wheel, front (without stop)

10 = 00 2 311 Wheel, rear (with stop)

11 = 00 2 312 Set of rippled mats