00 0 190 Cable cabinet I, complete
WARNING: This page is about a different car, the 2005 BMW 760i, 2005 BMW 760Li, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
CABLE CABINET I SPECIFICATIONS
| Note: | With set of films and accessories - For storing adapter cables as well as measuring devices and testers |
| SI number: | 0 02 99 (399) |
| Order number: | 00 0 190 |
| Cable cabinet I, complete | |
| Consisting of: | |
| 1 = 00 0 191 | Cable cabinet |
|
NOTE:
Without contents or accessories
Basis for cable cabinets I and II |
|
| 2 = 00 0 192 | Set of films I |
|
NOTE:
For identifying storage locations in cable cabinet I - valid status in each case
|
|
| 3 = 00 0 193 | Cable holder set - H - |
|
NOTE:
For cable cabinet I only 24 guide rails each with 15 retaining straps for accommodating adapter leads
|
|
| 4 = 00 0 194 | Cable carrier - B - |
|
NOTE:
For accommodating engine test leads
For extending cable suspensions in cable cabinets I and II |
|
| 6 = 00 0 195 | Swivel board frame |
|
NOTE:
Carrier of cable suspensions in cable cabinets I and II
|
|
| 7 = 00 0 196 | Drawer block |
|
NOTE:
For cable cabinet I only
|
|
| 8 = 00 0 197 | Magnet with roller |
|
NOTE:
For improved location and spacing of swivel boards - For retrofitting in cable cabinets I and II only
|
|
| 9 = 00 0 198 | Compartment floor |
|
NOTE:
For cable cabinet I only
|
|
| 10 = 00 0 199 | Index |
|
NOTE:
For finding BMW special tools for automotive electrics in cable cabinets I and II
|