23 11 Case and Cover
WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
CASE AND COVER SPECIFICATION
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission housing, rear section/front section | All | 22 N.m | ||
| 2AZ Cover with guide tube/transmission case | All | M8 x 22 | 18 N.m | |
| All | M8 x 30 | 25 N.m | ||
| All | M6 | 10 N.m | ||
| 3AZ Bearing cap/sealing flange | All | 10.5 N.m | ||
| 4AZ Reverse gear wheel axle to intermediate housing | All | 49 N.m | ||
| 5AZ Retaining plate for reverse gear wheel axle to intermediate housing | All | 25 N.m | ||
| 6AZ Transmission closing plate | All | M6 | 8 N.m |
CASE AND COVER SPECIFICATION
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| 6AZ Reverse gear shaft to case | All | M8 | 25 N.m | |
| S5D310Z / S5D 320Z | M8 | 20 N.m | ||
| All | M10 | 45 N.m | ||
| 7AZ Support for reverse gear shaft | 240 / 260 | M8 | 25 N.m | |
| 8AZ Bearing bracket on rear section of case | 240 / 260 / 265 / 280 | M6 | 10 N.m | |
| 9AZ Mounting tabs for sealing cover | 280 | M6 | 10 N.m | |
| 10AZ Bearing on countershaft | S5D 200G / S5D 250G | M10 | 90 N.m | |
| S5D310Z / S5D 320Z | M10 | 30 N.m | ||
| 280 | M10 | 60 N.m |
CASE AND COVER SPECIFICATION
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| 11AZ Seal plug to rear housing section | All | M20 | 60 N.m | |
| 240 | M16 | 40 N.m | ||
| 260 / 280 | M22 | 60 N.m | ||
| 12AZ Sealing caps to rear housing section | 240 / 260 / 280 | M6 | 10 N.m | |
| 13AZ Reversing bolt to reversing lever | ZFS-5-16 / S5D 310Z / S5D 320Z | 43 N.m | ||
| 14AZ Clamping claws to rear case section | ZFS-5-16 / S5D 310Z / S5D 320Z | 33 N.m | ||
| 15AZ Screws on detent plate | ZFS-5-16 / S5D 310Z / S5D 320Z | 9 N.m |