LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Cooling System - Tightening Torques) >> Oil Cooler Lines >> 17 22 Oil Cooler Pipes

17 22 Oil Cooler Pipes

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
OIL COOLER PIPES TIGHTENING TORQUE SPECIFICATION (1 OF 2)

  Type Thread tightening Specification Measure
1AZ Pipes to engine oil cooler All     28 N.m
2AZ Pipes to oil filter head E36 / M3     25 N.m
3AZ Holder on oil cooler pipes All     6 N.m
4AZ Holder for oil cooler pipes to alternator E36 / M3 M6   10 N.m


OIL COOLER PIPES TIGHTENING TORQUE SPECIFICATION (2 OF 2)

  Type Thread Tightening Specification Measure
5AZ Cap nut on transmission oil cooler (on radiator) and on transmission All M18 x 1.5   20 N.m
  5HP30 M22 x 1.5   28 N.m
6AZ Oil lines on transmission        
Hollow bolt All M16 x 1.5   37 N.m
7AZ Oil lines on transmission oil cooler A 5 S 300 J     28 N.m
Hollow bolt All M14 x 1.5   27 N.m
8AZ Screw-in fitting on transmission All M 14x1.5 and M16x1.5   37 N.m
9AZ Oil hose on oil pipe E23     28 N.m
10AZ Oil pipe bracket on radiator E23     2 N.m
11AZ Oil pipe bracket on body E23     6.5 N.m
12AZ Oil cooler on transmission 5HP30     10 N.m
13AZ Transmission oil cooler line to transmission N42 M8   21 N.m