11 24 Connecting Rods and Bearings
WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS SPECIFICATION
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | S14 | Replace, wash and oil screws | 55 N.m | |
| S38 | Replace, wash and oil screws | |||
| Application torque | 5 N.m | |||
| Jointing torque | 30 N.m | |||
| Torque angle | 60° | |||
| S50 / S62 | M10 x 1.25 | Replace, wash and oil screws | ||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 65° | |||
| S54 | M11 x 1.25 | The tightening specification is described in the work step "Removing and installing piston". | ||