LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Body Equipment - Repair Instructions) >> Central Locking System >> 51 26 020 Replacing switch (central locking drive) for tailgate lock (Z3 coupe, M coupe) >> Notes

51 26 020 Replacing switch (central locking drive) for tailgate lock (Z3 coupe, M coupe): Notes

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Remove tailgate trim panel, refer to 51 49 008 REMOVING AND INSTALLING (ENTIRE) TAILGATE TRIM (Z3 COUPE, M COUPE) 

Lift out actuating rod (1).

Disconnect plug connection (2).

Unfasten screws (3) and remove actuator drive (4).

Fig 1: Removing Actuator Drive
G03199338Courtesy of BMW OF NORTH AMERICA, INC.