36 12 084 Replacing sealant bottle of M -Mobility system: Notes

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This work step describes how the sealant bottle is replaced within the framework of inspection (M-Mobility system not used).
If the M-Mobility system has been used, also replace the transparent tire inflation hose.

Remove seal film (1). Not necessary if M-Mobility system has already been used.

Fig 1: Removing Seal Film

Courtesy of BMW OF NORTH AMERICA, INC.

Special tools required:

36 1 080

NOTE: This operation describes how to replace the sealant bottle within the framework of inspection (M-Mobility system unused). The control head must also be replaced if the M-Mobility system has already been used.

Pull off sticker for warning V max (1). Omitted if M -Mobility system already used.

Lift cover (2) off control head.

Fig 1: Removing Cover Of Control Head

Courtesy of BMW OF NORTH AMERICA, INC.