LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Clutch - Repair Instructions) >> Maintenance And Inspection >> 21 00 010 Checking Clutch Drive Plate For Wear >> Measuring scale B+C:

Measuring scale B+C:

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

6 cylinders and all 4 cylinders with ZMS (dual -mass flywheel)

  1. Transmission S5D 200G
  2. Transmission S5D 250G
  3. Transmission S5D 260Z
  4. Transmission S5D 310Z
  5. Transmission S5D 320Z

Push pressure pin against release lever and read off wear reading.

Fig 1: Pushing Pressure Pin
G03198896Courtesy of BMW OF NORTH AMERICA, INC.

If red range (2) is visible, drive plate must be replaced.

  1. Clutch liner OK
  2. Clutch liner worn
    Fig 2: Identifying Wear Reading
    G03198897Courtesy of BMW OF NORTH AMERICA, INC.