11 23 010 Removing and installing/replacing vibration damper (S54): Installation:

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Install belt pulley.

Fig 1: Installing Belt Pulley

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws.

Tightening torque, 11 23 3AZ. Refer to 11 23 VIBRATION DAMPER .

Installation:

Check dowel sleeves (1) for damage and correct installation position.

Fig 2: Checking Dowel Sleeves

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install plate (1) for TDC marking.

Fig 3: Installing Plate For TDC Marking

Courtesy of BMW OF NORTH AMERICA, INC.