11 36 582 Replacing solenoid valve on VANOS adjustment unit (S54)

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (1) on solenoid valve.

Fig 1: Disconnecting Plug Connection On Solenoid Valve

Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Have a cleaning cloth ready. A small quantity of oil will emerge after the screws have been released.
Make sure no oil runs onto belt drive. Remove any remnants of oil immediately with cleaning cloth.

Release screws and remove solenoid valve with sealing plate.

Installation:

Replace sealing plate (1). Sealing surfaces on solenoid valve and on VANOS adjustment unit clean and oil-free.

Fig 2: Replacing Sealing Plate

Courtesy of BMW OF NORTH AMERICA, INC.