11 12 000 Removing and installing, sealing cylinder head cover (S54): Notes

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Remove hose (1) for engine vent.

Fig 1: Removing Sealing Cap And Hose For Engine Vent

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing cap (2).

Remove ignition coil cover.

Disconnect plug connection (1) on sensor of exhaust camshaft.

Fig 2: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Illustration shows: US version.