00 00... Front and (if necessary) rear disk brake linings: remove and install, check total thickness. Clean brake shafts. If necessary, replace linings. Brake disks: Check surface and thickness. Grease wheel centering mount on alloy wheels
WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
Remove front and (if necessary) rear disk brake linings. For further information on how to proceed, refer to DISC PAD .
NOTE:
Clean brake shafts.
Replace brake linings if:
- linings drop below minimum thickness (refer to TECHNICAL DATA)
Replace brake disks if:
- disks drop below minimum thickness (refer to TECHNICAL DATA)
- Presence of:
- Scoring
- Heat cracks
- Lateral runout
- Thickness difference
CAUTION:
After completing tasks, press brake pedal several times so that brake linings rest against brake disks.