LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Air Bag Restraint Systems) >> Removal & Installation >> Steering Wheel >> Removal & Installation Steering Wheel)

Removal & Installation Steering Wheel)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 BMW M3, 2003 BMW 330xi, 2003 BMW 330i, 2003 BMW 330Ci, and 2003 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE .
  2. Ensure front wheels are in straight-ahead position. Remove steering wheel bolt. Mark steering wheel hub in relation to steering shaft for installation reference. Remove steering wheel.
  3. To install, reverse removal procedure. Coat slip ring with grease. Tighten steering wheel nut or bolt to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.