LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Heating And Air Conditioning - Repair) >> Condenser and dryer with lines >> 64 53 510 Removing and installing / replacing drier flask for air conditioner

64 53 510 Removing and installing / replacing drier flask for air conditioner

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 325Ci, 2005 BMW 325xi, 2005 BMW 325i, 2005 BMW 325Ci, and 2004 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: A/C system is drawn off. Follow instructions for dryer bottle replacement, refer to 64 53... NOTES ON REPLACING DRIER BOTTLE OR DRIER INSERT .

All except M3: 

Remove fluid reservoir for windshield washer system. See 61 71 061 REPLACING FLUID TANK FOR WINDSHIELD WASHER SYSTEM

All: 

Unfasten screws.

Detach pressure and suction pipes towards top.

Fig 1: Detaching Pressure And Suction Pipes Towards Top
G03166160Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Provide pressure and suction pipes with plugs if A/C system remains open for longer than one hour.

Installation: 

Replace sealing rings.

Unfasten screws.

Fig 2: Unfastening Screws
G03166161Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Feed out wheel arch undertrim.

Fig 3: Feeding Out Wheel Arch Undertrim
G03166162Courtesy of BMW OF NORTH AMERICA, INC.

Loosen bolts.

Pull out dryer bottle towards bottom.

Fig 4: Pulling Out Dryer Bottle Towards Bottom
G03166163Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: In event of warranty application, seal line openings with plugs of new dryer bottle.