51 22 330 Removing and installing/replacing window cavity cover strip on inside rear door

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 325Ci, 2005 BMW 325xi, 2005 BMW 325i, 2005 BMW 325Ci, and 2004 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove rear door trim,

refer to 51 42 000 REMOVING AND INSTALLING REAR LEFT OR RIGHT DOOR TRIM PANEL .

NOTE: Do not damage cover (2) when removing window cavity cover strip (1).
Remove window cavity cover strip (1) towards top.

Installation:

If necessary, remove faulty clips (3) from inner door panel and replace.

Fig 1: Removing Faulty Clips From Inner Door Panel
Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Prior to installation, coat window cavity cover strip (1) with soapy solution (washing-up liquid).

Fig 2: Identifying Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Window cavity cover strip (1) must (as shown in illustration) be above cover (2) for door window frame.

Fig 3: Window Cavity Cover Strip (1) Must Be Above Cover (2) For Door Window Frame
Courtesy of BMW OF NORTH AMERICA, INC.