LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Cooling System - Tightening Torques) >> Auxiliary Electrical Fan >> 17 22 Oil Cooler Pipes

17 22 Oil Cooler Pipes

WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
OIL COOLER PIPES TIGHTENING TORQUE SPECIFICATIONS

  Type thread tightening specification Measure
1AZ Pipes to engine oil cooler All     28 Nm
2AZ Pipes to oil filter head E36 / M3     25 Nm
3AZ Holder on oil cooler pipes All     6 Nm
4AZ Holder for oil cooler pipes to alternator E36 / M3 M6   10 Nm


OIL COOLER PIPES TIGHTENING TORQUE SPECIFICATIONS

  Type Thread Tightening specification Measure
5AZ Cap nut on transmission oil cooler (on radiator) and on transmission All M18 x 1.5   20 Nm
  5HP30 M22 x 1.5   28 Nm
6AZ Oil lines on transmission        
Hollow bolt All M16 x 1.5   37 Nm
7AZ Oil lines on transmission oil cooler A 5 S 300 J     28 Nm
Hollow bolt All M14 x 1.5   27 Nm
8AZ Screw-in fitting on transmission All M14 x 1.5 und M16x1.5   37 Nm
9AZ Oil hose on oil pipe E23     28 Nm
10AZ Oil pipe bracket on radiator E23     2 Nm
11AZ Oil pipe bracket on body E23     6.5 Nm
12AZ Oil cooler on transmission 5HP30     10 Nm
13AZ Transmission oil cooler line to transmission N42 M8   21 Nm