LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Body Equipment - Repair) >> Floor/Luggage/Eng Comp Tr. Panels >> 51 47 151 Removing And Installing/Replacing Trunk Wheel Housing Trim, Left

51 47 151 Removing And Installing/Replacing Trunk Wheel Housing Trim, Left

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW M3, 2005 BMW M3, 2004 BMW M3, 2003 BMW M3, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove socket housing for tail light in side section, refer to 63 21 055 REPLACING A SOCKET HOUSING FOR LEFT OR RIGHT REAR LIGHT (COUPE, CONVERTIBLE) .
  2. Version with through-load system:
  3. Remove rest side section from rear seat backrest, refer to 52 26 008 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT SIDE SECTION OF REAR SEAT BACKREST (THROUGH-LOADING SYSTEM) (COUPE) .

Take out luggage compartment floor trim panel (1).

Remove cover for spare wheel/jack.

Fig 1: Removing Luggage Compartment Floor Trim Panel
G03119220Courtesy of BMW OF NORTH AMERICA, INC.

Remove warning triangle.

Release expansion rivet (1) and remove fixture (2) for warning triangle.

Fig 2: Locating Expansion Rivet
G03119221Courtesy of BMW OF NORTH AMERICA, INC.

Version with through-load system:

Release expansion rivet (1).

Fig 3: Identifying Expansion Rivet
G03119222Courtesy of BMW OF NORTH AMERICA, INC.

Partially release panel for trunk separating wall.

Release expansion rivet (1) and remove trunk arch housing trim (2).

Fig 4: Removing Trunk Arch Housing Trim Expansion Rivet
G03119223Courtesy of BMW OF NORTH AMERICA, INC.