11 34 560 Replacing All Valve Stem Seals - Cylinder Head Removed (S50/S54)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW M3, 2005 BMW M3, 2004 BMW M3, 2003 BMW M3, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For Special Tool identification, see SPECIAL TOOLS - M3 .
Special Tools Required:
- 11 1 200
- 11 1 380
- 11 1 480
- 11 1 960
Preliminary tasks are described in 11 12 503 DISASSEMBLING AND ASSEMBLING CYLINDER HEAD - CYLINDER HEAD REMOVED (S54) .
Remove valve stem seal with special tool 11 1 480.
S50 B32 And S54:
Valve stem diameter 6 mm:
Installation:
Lubricate valve stem with oil and insert valve.
Fit special tool 11 1 960.
Coat new valve stem seal (1) with oil and install.
NOTE:
Special tool 11 1 200 is used for valve stem diameters 6 mm and 7 mm.
Installation:
Press valve stem seal firmly home by hand with special tool 11 1 200.