LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Body Equipment - Tightening Torques) >> Side Covering With Arm >> 51 43 Side Trim Panel with Armrests

51 43 Side Trim Panel with Armrests

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
SIDE TRIM PANEL WITH ARMRESTS COMPONENT TORQUE SPECIFICATIONS

  Type Thread Tightening specification Measure
1AZ Trim, rear roof pillar (C-pillar) on body E38 / E60     3.0 N.m
  E61 / E65 / E66 / E67     4.0 N.m
  E83     2.0 N.m
  E87 / E90 / E91     2.5 N.m
2AZ Trim, front roof pillar (A-pillar) on body E46     1.8+0.4 N.m
  E60 / E61 / E63 / E64 / E87 / E90 / E91     2.5 N.m
  E83     2.0 N.m
  E65 / E66 / E67     4.5 N.m
3AZ Side trim panel to body E46 / CoupeA     3 +/- 0.5 N.m
  E46 / Compact     4.2 +/- 0.8 N.m
4AZ Armrest to side trim panel E46 / CoupeA     2.5 +/- 0.5 N.m