13 62 Engine Control Sensors
TIGHTENING TORQUE SPECIFICATION (SENSORS FOR CONTROL UNIT)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Camshaft sensor to cylinder head | S55 | M6x16 | 8 Nm | |
| 2AZ Connector housing, crankshaft sensor, to crankcase | S55 | M6x16 | 8 Nm | |
| 3AZ Knock sensor to crankcase | S55 | M8x30 | 21.5 Nm | |
| 4AZ Intake pressure sensor | S55 | 4 Nm | ||
| 5AZ Coolant temperature sensor | S55 | 18 Nm | ||
| 6AZ Cable channel to engine block | S55 | M8 | 19 Nm | |
| 7AZ Oil temperature sensor to engine block | S55 | 18 Nm | ||
| 8AZ Crankshaft sensor to crankcase | S55 | 4.6 Nm | ||
| 9AZ Pulse sensor to drive high pressure pumps | S55 | 8 Nm |