11 28 V Belt With Belt TENSIONER And Idler Pulley
TIGHTENING TORQUE SPECIFICATION (V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT)
| Standard belt drive | Type | Thread | Tightening specifications | Dimension |
|---|---|---|---|---|
| 1AZ Belt tensioner with deflection pulley to engine block. | S55 | M10x90 | 38 Nm | |
| 2AZ Deflecting element 65x32 | S55 | M10x55 | 60 Nm | |
| 3AZ Deflecting element 75x32 | S55 | M10x55 | 60 Nm | |
| 4AZ Holder for deflecting element to lower section of crankcase (bedplate) | S55 | M10x30 | 38 Nm | |
| 5AZ Deflecting element to air conditioning compressor holder | S55 | M10x55 | 60 Nm | |
| 6AZ Belt wheel to coolant pump | S55 | M6x12 | 8 Nm |