18 20 Exhaust System Bracket/Intermediate Pipe
TIGHTENING TORQUE SPECIFICATION (EXHAUST SYSTEM SUSPENSION)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Flange steady to catalytic converter | S55 | M6x12 | 10 Nm | |
| 2AZ Exhaust system on transmission cross-member | S55 | M8x25 | Replace screw | 28 Nm |
| 3AZ Exhaust system to body | S55 | M8 | Replace nut | 19 Nm |
| 4AZ Exhaust system to rear axle carrier | S55 | M8 | Replace nut | 19 Nm |
| 5AZ Controller drive for exhaust flap | S55 | 9 Nm |