17 22 Oil Cooler Lines
TIGHTENING TORQUE SPECIFICATION (ENGINE OIL COOLER LINES AND TRANSMISSION OIL COOLER LINES)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Transmission oil cooler line to transmission | S55 | M8 | 19 Nm | |
| 2AZ Holder oil sump for transmission thermostat | S55 | M6 | Replace screws. | |
| Jointing torque | 4 Nm | |||
| Angle of rotation | 45° | |||
| 3AZ Engine oil cooler to support | S55 | M8x35 | 19 Nm | |
| 4AZ Engine oil cooler line to oil filter housing | S55 | M6 | 8 Nm | |
| 5AZ Engine oil cooler line to engine oil cooler | S55 | M6 | 8 Nm | |
| 6AZ Thermostat to holder | S55 | M5 nut | 5 Nm | |
| 7AZ Transmission oil line to thermostat | S55 | M6 | 8 Nm | |
| 8AZ Oil line with clips to spacer bolt | S55 | Bolt | Replace spacer bolt. | 10 Nm |