17 10 Radiator, Expansion Tank, Lines
TIGHTENING TORQUE SPECIFICATION (RADIATOR, EXPANSION TANK)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Fan cowl to module carrier | S55 | 5.5 Nm | ||
| 2AZ Cover on radiator, top | S55 | 5.5 Nm | ||
| 3AZ Electric coolant pump (low temperature) to fan cowl | S55 | 5.5 Nm | ||
| 4AZ Air duct to fan cowl | S55 | 5.5 Nm | ||
| 5AZ Coolant expansion tank to body/carbon strut | S55 | Mx16 | 8 Nm | |
| 6AZ Additional coolant radiator to support | S55 | Screw | 10 Nm | |
| 7AZ Expansion tank for charge air cooler to charge air cooler | S55 | Screw | 5.5 Nm | |
| 8AZ Electric coolant pump (high temperature) with holder to crankcase | S55 | M8x22 | 19 Nm | |
| 9AZ Charge air cooler to throttle body | S55 | Clamp | 3 Nm | |
| 10AZ Holder to charge air cooler | S55 | 7.5 Nm | ||
| 11AZ Cover to module carrier, bottom | S55 | 5.5 Nm |