Removing and installing/replacing support for left or right outer door handle with lock barrel (M4 Coupe, M4 Convertible)

Necessary preliminary tasks: 

• Close side window if necessary
• Remove OUTER DOOR HANDLE ON FRONT DOOR .
• Remove DOOR LOCK OF FRONT DOOR .

Remove seals (1) in direction of arrow.

Release screw (2) and remove holder (3) to outside.

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, release cable clip from support (1).

Remove inner support (1) in direction of arrow and feed out of door.

Courtesy of BMW OF NORTH AMERICA, INC.

For version with Comfort Access/light package: 

Release cable clip (1) from support (2).

Disconnect plug connection (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

For it to be possible to install the door lock, locking pin (1) must be in the installation position on the support (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement 

Release sound cover (1) at clips (2) and maneuver out of support (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement 

Unclip Bowden cable (1) in area (A) and maneuver out of support (2).

Installation note: 

Ensure that the Bowden cable (1) is correctly routed at support (2).

For version with Comfort Access/light package  :

Modify OUTSIDE DOOR HANDLE LIGHT ON FRONT DOOR .

Courtesy of BMW OF NORTH AMERICA, INC.