Adjusting Tailgate (M4 GTS Coupe, 2016 Only)
Attention:
Do not damage adjoining body components.
Minor corrections through straightening work are permitted if the existing range of adjustments are not sufficient.
Observe Gap Dimensions: See BODY DIMENSIONS .
The tailgate must be provided with all attachment parts for correct adjustment.
Necessary preliminary work:
- Remove TAILGATE TRIM PANEL .
Carry over the work step shown symmetrically to the other side of the vehicle.
Slacken screws (1)
The reinforcement plate (2) must still be moveable.
Carry over the work step shown symmetrically to the other side of the vehicle.
Slacken screws (1) until such stage that the tailgate can still be moved.
Adjust tailgate laterally and longitudinally.
Tightening torque 41 62 TAILGATE .
When the tailgate is closed, the striker must not touch or scrape against the tailgate lock. If necessary, remove striker.
Carry over the work step shown symmetrically to the other side of the vehicle.
Tighten down screws (1).
Tightening torque 41 62 TAILGATE .
View of trim panel for storage shelf from luggage compartment:
Press grommet (1) through and pull out toward the bottom with long-nose pliers.
Installation note:
Replace damaged grommet.
Install the grommet contrary to series assembly from the bottom.
Slacken nut (1) with a suitable tool (SW13) until the hinge can be moved.
Adjust height of tailgate.
Tightening torque 41 62 TAILGATE .
Adjust ADJUSTING REAR LID LOCK (M4 COUPE) .
Adjust ADJUSTING/REPLACING BUMP STOPS (M4 COUPE) .
Required follow-up work:
- Touch up unpainted surfaces in the appropriate color.
- Install the TAILGATE TRIM PANEL .