LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M4 2D Convertible, Automatic DCT Trans >> Repair and Diagnosis >> Collision >> Structural >> Collision - Body Panel Repair (F82 & F83) >> 41 61 Bonnet >> Removing And Installing Engine Compartment Lid (Active Pedestrian Protection AFGS) (M4 Coupe, M4 Convertible)

Removing And Installing Engine Compartment Lid (Active Pedestrian Protection AFGS) (M4 Coupe, M4 Convertible)

WARNING: Danger of injury!

The battery earth lead must be clamped off prior to work on the hinge or engine compartment lid!

Adhere to the following safety information so as to avoid a danger of injury by the actuator.

IMPORTANT: Support engine compartment lid in fully opened position with suitable apparatus.

Removal of the engine compartment lid must be carried out with the assistance of a second person.

For stripping and rigging operations, refer to texts on KSD CD (FR number 41 61 010).

Follow instructions on ACTIVE PEDESTRIAN PROTECTION  system.

Necessary preliminary tasks: 

Disconnect negative battery cable.

Release the lock (1) and detach the water hose (2).

Unfasten plug connection (3) and disconnect.

G10096800Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Remove engine compartment lid.

Installation note: 

Install engine compartment lid at screw locations to on hinge.

Tightening torque 41 61 BONNET .

If necessary, adjust ENGINE COMPARTMENT LID .

G10096796Courtesy of BMW OF NORTH AMERICA, INC.