Stripping Operations - Replacing Left Luggage Compartment Floor (Rear Side Wall And Tail Panel Removed) (M4 Convertible)
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
Release plug connections (1) from facing (4).
Lever out expanding rivet (2).
Release nuts (3) and remove facing (4).
Release nut (1) and move holder (2) forwards.
Release wiring harness at attachment point (3) and tie up forwards.
Release insulating mat (4) and tie forwards.
Release latch mechanisms and remove rear ventilation (5).
Installation note:
The rear ventilation must not be damaged! (watertightness).
All latch mechanisms must engage audibly.
Remove insulation (1) and (2).