Stripping Operations - Replace The Luggage Compartment Floor And Left Side Member (Removed Left Side Wall And Tail Panel) (M4 Coupe)

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.

The following list basically represents the removal sequence.

Remove exhaust system (job number: petrol engine 18 00 020, diesel engine 18 00 018)
Remove exhaust system heat shield
Remove rear axle support (job number: 33 31 000)

Release nut (1) for ground connection.

Tightening torque 41 14 1AZ.

Release wiring harness at attachment point (2) and set aside.

Release latch mechanisms and remove rear ventilation (3).

Release insulating mat (4) and tie forwards.

Installation note:

The rear ventilation must not be damaged! (watertightness).

Courtesy of BMW OF NORTH AMERICA, INC.

All latch mechanisms must engage audibly.