Replacing Right Luggage Compartment Floor (Rear Side Panel And Tail Panel Removed) (M4 Coupe)

Read contents of BODY, GENERAL .

For stripping and rigging operations, refer to texts on KSD CD (job number 41 12 654).

Use only approved SPOT-WELDING APPARATUS  for repairs.

Following new body parts are required (see applicable BMW Parts Catalog):

• (1) Luggage compartment floor, right

Courtesy of BMW OF NORTH AMERICA, INC.

Removal 

Mark severance cut (1) next to reinforcement (2) and disconnect.

Open welded connections in area (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in area (1).

Remove the luggage compartment floor.

Courtesy of BMW OF NORTH AMERICA, INC.

New part preparation 

Mark severance cut on luggage compartment floor in accordance with severance cut on vehicle + 15 mm for extra material and cut.

Adjust luggage compartment floor in combination with side panel and tail panel to fit.

Prepare luggage compartment floor for joining by welding.

Installation 

Install new part and weld.