Replacing bulb for turn indicator, front left

IMPORTANT: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Unlock and remove cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Turn bulb holder (1) in direction of arrow and remove from headlight (2).

IMPORTANT: Risk of damage due to moisture penetration!

Installation note:

Check seal. Replace bulb holder (1) if necessary.

Turn bulb holder (1) clockwise to limit position.

Bulb holder (1) must lock correctly.

Courtesy of BMW OF NORTH AMERICA, INC.

21W version:

Pull bulb (1) in direction of arrow out of bulb holder (2).

Installation note:

Courtesy of BMW OF NORTH AMERICA, INC.

Type PY24W:

Turn bulb with socket (1) in direction of arrow and remove from bulb holder (2) toward the top.

Installation note:

Check that bulb with socket (1) and sealing ring (3) on bulb holder (2) are correctly seated.

NOTE: Verify BULB TYPE .

Courtesy of BMW OF NORTH AMERICA, INC.