Removing and installing/replacing footwell light
IMPORTANT:
Follow notes for HANDLING LIGHT BULBS (INTERIOR LIGHTS) .
Footwell, left/right:
Lever footwell light (1) in direction of arrow out of trim panel (2).
Disconnect plug connection behind and remove footwell light (1).
Door, left/right:
Lever footwell light (1) in direction of arrow out of door trim panel (2).
Disconnect plug connection behind and remove footwell light (1).
Replacement:
- Verify BULB TYPE .
The footwell light in LED technology must be completely replaced!
Turn bulb holder (1) in direction of arrow and pull out of footwell light (2).
Installation note:
Make sure bulb holder (1) is correctly seated and latched on footwell light (2).
Pull bulb (1) in direction of arrow out of bulb holder (2).